erikheinemann
Goto Top

Cups-Server mit SMB lehnt Verbindungen ab (smb.conf)?

Guten Morgen,
ich habe einen Ubuntu 20.04 Server mit Cups als Printspooler. Nun Soll noch Samba hinzugefügt werden für eine einfache Verwendung unter Windows. Ich habe mich an den im Internet verfügbaren Anleitungen orientiert und die smb.conf so angepasst, dass Samba Cups als Spooler erkennt.
   [global]
   load printers = yes
   printing = cups
   printcap name = cups
Wenn ich nun aber den Drucker unter Windows hinzufügen will (\\Printspooler\drucker) bekommte ich die Meldung das keine Weiteren Verbindungen zum Client hergestellt werden können, da bereits die maximale zahl an Verbindungen zu dem Remote-Computer erreicht ist. (siehe Screenshot)

Ich denke das es ein Fehler in der smb.conf ist, habe aber keine Ahnung was es sein könnte.
Vielen Dank für die Hilfe!!
screenshot 2021-04-16 082302

Content-Key: 665798

Url: https://administrator.de/contentid/665798

Ausgedruckt am: 29.03.2024 um 10:03 Uhr

Mitglied: Lochkartenstanzer
Lochkartenstanzer 16.04.2021 aktualisiert um 08:56:29 Uhr
Goto Top
Moin,

Hast Du Samba-Benutzer angelegt oder zumindest die Verbindung als Gast zugelassen?

Wie sieht der Rest der Config aus?

Und warum verbindest Du den Drucker nicht einfach als "Internet-Printer" statt als SMB-Printer?

lks
Mitglied: ErikHeinemann
ErikHeinemann 16.04.2021 um 09:14:29 Uhr
Goto Top
Hi, Danke für deine Antwort,

den Gastzugrif habe (glaube) ich aktiviert.

Hier die smb.conf:
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which 
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting  
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default  
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic   
# errors. 

#======================= Global Settings =======================

[global]
	log file = /var/log/samba/log.%m
	printing = cups
	unix password sync = yes
	obey pam restrictions = yes
	usershare allow guests = yes
	map to guest = bad user
	server string = %h server (Samba, Ubuntu)
	load printers = yes
	passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
	logging = file
	workgroup = WORKGROUP
	max log size = 1000
	server role = standalone server
	printcap name = cups
	panic action = /usr/share/samba/panic-action %d
	pam password change = yes
	passwd program = /usr/bin/passwd %u

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of

# server string is the equivalent of the NT Description field

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.  
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects

# Cap the size of the individual log files (in KiB).

# We want Samba to only log to /var/log/samba/log.{smbd,nmbd}.
# Append syslog@1 if you want important messages to be sent to syslog too.

# Do something sensible when Samba crashes: mail the admin a backtrace


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary  
# domain controller", "classic backup domain controller", "active  
# directory domain controller".   
#
# Most people will want "standalone server" or "member server".  
# Running as "active directory domain controller" will require first  
# running "samba-tool domain provision" to wipe databases and create a  
# new domain.


# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.  

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary  
# classic domain controller', 'server role = backup domain controller'  
# or 'domain logons' is set   
#

# It specifies the location of the user's  
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory  
# (this is Samba's default)  
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set  
# It specifies the location of a user's home directory (from the client  
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set  
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention  
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u  

# This allows machine accounts to be created on the domain controller via the 
# SAMR RPC pipe.  
# The following assumes a "machines" group exists on the system  
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u  

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.  
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges  
# for something else.)
;   idmap config * :              backend = tdb
;   idmap config * :              range   = 3000-7999
;   idmap config YOURDOMAINHERE : backend = tdb
;   idmap config YOURDOMAINHERE : range   = 100000-999999
;   template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 means that usershare is disabled.
#   usershare max shares = 100

# Allow users who've been granted usershare privileges to create  
# public shares, not just authenticated ones

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username  
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.  
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"  
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)  
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

#--------------------
[global]
   load printers = yes
   printing = cups
   printcap name = cups
#--------------------

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
   guest ok = yes
   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = yes
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your  
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin

Mein Ausbilder gab mir die Aufgabe neue Systeme zu probieren. Leider ist es am ende nicht möglich, dass wenn wir dieses System auswählen, würden die Mitarbeiter es nicht hinbekommen einen Internettrucker hinzuzufügen.

Danke & Gruß
Erik
Mitglied: Lochkartenstanzer
Lochkartenstanzer 16.04.2021 aktualisiert um 10:01:18 Uhr
Goto Top
Da das Forensystem größere Änderungen nicht erlaubt, habe ich die bereinigte Version frisch reingestellt.


Ich habe mal Deine Config um die Kommentare (#) bereinigt, damit es einfacher zu lesen ist udn die Kollegen dann besser "mitraten" können:

;[homes]
;   comment = Home Directories
;   browseable = no
;   read only = yes
;   create mask = 0700
;   directory mask = 0700
;   valid users = %S

;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[global]
   load printers = yes
   printing = cups
   printcap name = cups

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
   guest ok = yes
   read only = yes
   create mask = 0700

[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = yes
;   write list = root, @lpadmin


lks

Was mir auffällt, ist das Du netlogon auskommentiert hast. War das in der default-Config so oder hast Du das selbst gemacht.
Mitglied: commodity
commodity 16.04.2021 um 09:48:09 Uhr
Goto Top
Zitat von @Lochkartenstanzer:
Ich habe mal Deine Config um die Kommentare (#) bereinigt, damit es einfacher zu lesen ist udn die Kollegen dann besser "mitraten" können:
Das war auf jeden Fall eine gute Idee! +1

Ich bin in Samba nicht erfahren, aber gehört das nicht auch zur Config des TO?

[global]
	log file = /var/log/samba/log.%m
	printing = cups
	unix password sync = yes
	obey pam restrictions = yes
	usershare allow guests = yes
	map to guest = bad user
	server string = %h server (Samba, Ubuntu)
	load printers = yes
	passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
	logging = file
	workgroup = WORKGROUP
	max log size = 1000
	server role = standalone server
	printcap name = cups
	panic action = /usr/share/samba/panic-action %d
	pam password change = yes
	passwd program = /usr/bin/passwd %u

Dort steht dann auch ein
map to guest = bad user
was doch bedeutet, dass er nicht authorisierte Zugriffe auf einen guest-account mappt. Dieser guest-account ist aber gar nicht angelegt bzw. definiert. Dafür gab/gibt(?) es doch
guest account = <accountname> 
siehe hier(älteres Baujahr) oder
hier (auch nicht ganz frisch).

Vielleicht hilft es bei der Richtung. Good Luck!
Mitglied: ErikHeinemann
ErikHeinemann 16.04.2021 um 09:50:10 Uhr
Goto Top
Vielen Dank,
das kommt aus der Standard konfig.
Mitglied: Lochkartenstanzer
Lochkartenstanzer 16.04.2021 um 09:50:15 Uhr
Goto Top
Ich bin in Samba nicht erfahren, aber gehört das nicht auch zur Config des TO?

Ups War ein Copy&Paste-fehler.

Wird gleich berichtigt.


lks
Mitglied: Lochkartenstanzer
Lochkartenstanzer 16.04.2021 aktualisiert um 09:58:23 Uhr
Goto Top
Hier nochmal die berichtigte bereinigtte Version ohne die #-Kommentare zum mitraten

[global]
	log file = /var/log/samba/log.%m
	printing = cups
	unix password sync = yes
	obey pam restrictions = yes
	usershare allow guests = yes
	map to guest = bad user
	server string = %h server (Samba, Ubuntu)
	load printers = yes
	passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
	logging = file
	workgroup = WORKGROUP
	max log size = 1000
	server role = standalone server
	printcap name = cups
	panic action = /usr/share/samba/panic-action %d
	pam password change = yes
	passwd program = /usr/bin/passwd %u
;   interfaces = 127.0.0.0/8 eth0
;   bind interfaces only = yes
;   logon path = \\%N\profiles\%U
;   logon drive = H:
;   logon script = logon.cmd
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
; add group script = /usr/sbin/addgroup --force-badname %g
;   include = /home/samba/etc/smb.conf.%m
;   idmap config * :              backend = tdb
;   idmap config * :              range   = 3000-7999
;   idmap config YOURDOMAINHERE : backend = tdb
;   idmap config YOURDOMAINHERE : range   = 100000-999999
;   template shell = /bin/bash

;[homes]
;   comment = Home Directories
;   browseable = no
;   read only = yes
;   create mask = 0700
;   directory mask = 0700
;   valid users = %S

;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[global]
   load printers = yes
   printing = cups
   printcap name = cups

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
   guest ok = yes
   read only = yes
   create mask = 0700

[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = yes
;   write list = root, @lpadmin

lks
Mitglied: ErikHeinemann
ErikHeinemann 16.04.2021 um 10:05:25 Uhr
Goto Top
Muss ich vielleicht das zugreifende Gerät noch irgendwie erlauben?
Mitglied: Lochkartenstanzer
Lochkartenstanzer 16.04.2021 um 10:08:33 Uhr
Goto Top
Zitat von @commodity:

Zitat von @Lochkartenstanzer:
Ich habe mal Deine Config um die Kommentare (#) bereinigt, damit es einfacher zu lesen ist udn die Kollegen dann besser "mitraten" können:
Das war auf jeden Fall eine gute Idee! +1

Ich bin in Samba nicht erfahren, aber gehört das nicht auch zur Config des TO?

Nachdem ich das komplette Config ohne den Copy&Past-Fehler gesehen habe, vermute ich auch, daß da der Hase im Pfeffer liegt:

Dort steht dann auch ein
map to guest = bad user
was doch bedeutet, dass er nicht authorisierte Zugriffe auf einen guest-account mappt. Dieser guest-account ist aber gar nicht angelegt bzw. definiert. Dafür gab/gibt(?) es doch
guest account = <accountname> 
siehe hier(älteres Baujahr) oder
hier (auch nicht ganz frisch).


lks
Mitglied: ErikHeinemann
ErikHeinemann 16.04.2021 um 10:49:08 Uhr
Goto Top
Ich habe jetzt noch
guest account = administrator
hinzugefügt.

Mein Administrator Account hat root Rechte.
Müsste ich noch was ändern? oder sollte das das Problem dann lösen?


Vielen Dank für eure Mühe!!!
Mitglied: Lochkartenstanzer
Lochkartenstanzer 16.04.2021 aktualisiert um 11:15:23 Uhr
Goto Top
Zitat von @ErikHeinemann:

Ich habe jetzt noch
> guest account = administrator
> 
hinzugefügt.

Mein Administrator Account hat root Rechte.
Müsste ich noch was ändern? oder sollte das das Problem dann lösen?


Nein! Guest mapped man nie auf admin-Rechte, abgesehen davon, daß es den "administrator" unter Linux i.d.R. nicht gibt.

Schreib da lieber "nobody" hin.

Das ist der User, der dafür gedacht ist.

lks
Mitglied: ErikHeinemann
ErikHeinemann 16.04.2021 um 11:16:45 Uhr
Goto Top
Ja, ist mir bekannt. Befinde mich aber in einem geschlossenen Textsystem Daher. Aber dann probiere ich mal Nobody.
Mitglied: NordicMike
NordicMike 16.04.2021 um 12:10:35 Uhr
Goto Top
Ist der Name der Freigabe richtig?

\\spoolserver\druckername

Ich frage, weil wir unter Windows die CUPS Drucker so hinzufügen müssen:

http://spoolserver:631/printers/druckername
Mitglied: Lochkartenstanzer
Lochkartenstanzer 16.04.2021 um 12:18:58 Uhr
Goto Top
Zitat von @NordicMike:

Ist der Name der Freigabe richtig?

\\spoolserver\druckername

Ich frage, weil wir unter Windows die CUPS Drucker so hinzufügen müssen:

http://spoolserver:631/printers/druckername

Deswegen habe ich ja nachgefragt, warum er smb und nicht Internet-Printing benutzt.

lks
Mitglied: ErikHeinemann
ErikHeinemann 16.04.2021 um 14:21:48 Uhr
Goto Top
Die Freigabe die du beschreibst ist die über HTTP, die funktioniert auch einwandfrei. Aber das Zeil meiner Recherche im Auftrag meines Ausbilders ist, herauszufinden wie es über Samba funktioniert.
Mitglied: Lochkartenstanzer
Lochkartenstanzer 16.04.2021 aktualisiert um 14:28:58 Uhr
Goto Top
Zitat von @ErikHeinemann:

Die Freigabe die du beschreibst ist die über HTTP, die funktioniert auch einwandfrei. Aber das Zeil meiner Recherche im Auftrag meines Ausbilders ist, herauszufinden wie es über Samba funktioniert.

Dann schreib das doch dazu.

Dann richte mal einen zusätzlichen Benutzer "windowsuser" unter Ubuntu ein, richte dem einen Sambaaccount ein und vergib dem ein Paßwort.

Dann schaust Du, ob Du mit Windows auf das Home-Verzeichnis des Users kommst und auch ob Du dann den Drucker nutzen kannst.

Wenn das alles erledigt wurde udn damit die Funktionalität von Samba sichergestellt ist, machst Du Dich daran, das ganze als anonymer User (=Gast) zu tun.

lks
Mitglied: ErikHeinemann
ErikHeinemann 16.04.2021 um 14:44:58 Uhr
Goto Top
Okay, setze ich mich nächste Woche dran. Vielen dank für deine Hilfe!!!