kpt.chaos
Goto Top

Adaptec 39320A-R von Dell Bios auf Adaptec Bios flashen?

Moin zusammen...

ich habe einen Adaptec Scsi Controller 39320A-R allerdings befindet sich auf der Karte ein Dell Bios V4.30.4s5.

Dieses Bios ist abgestimmt auf die hauptsächliche Verwendung der Karte als Raid 0 & 1 controller

Ich möchte diese Karte jedoch aussließlich als ganz normalen SCSI Controller, also ohne jegliche Raid Varianten benutzen.

Normalerweise ist bei diesem Controller über die Bios Software "Adaptec SCSI SELECT" eine Auswahl zwischen normalem SCSI Controller Betrieb und Raid Betrieb möglich.
Nicht jedoch bei der instalierten Firmware (Bios) Version V4.30.4s5 von Dell.
Hier sind diese Schalter im "Adaptec SCSI SELECT" einfach nicht vorhanden.

Die Original Bios Version von Adaptec hierfür ist die V4.30

Leider lässt sie sich weder über das Adaptec DOS Tool "flash6.exe" (meldet passende Karte nicht gefunden)
noch über das Dell DOS Tool "scsiutil.exe" (meldet cheksum error seitens des Bios File) installieren.

Ebenso verlief es mit der Adaptec Biosversion V4.25
Nur dieses Dell Bios scheinen die Flashtools immer wieder gerne anzunehmen.


Hat jemand eine Idee wie ich das ursprüngliche Adaptec Bios auf die Karte Zaubern kann?

Hat jemand eine Idee wie das vorhandene Bios neutralisiert werden kann um auf basis der Hardware defaults
das Adaptec file einzuspielen?

Vielen Dank schonmal...

Content-Key: 18260

Url: https://administrator.de/contentid/18260

Ausgedruckt am: 28.03.2024 um 14:03 Uhr

Mitglied: Kpt.Chaos
Kpt.Chaos 01.11.2005 um 16:10:35 Uhr
Goto Top
Moin zusammen...

Habe das Problem gelöst.. freu face-smile

folgende Vorgehensweise sollte für jeden mit Ähnlichem Problem funktionieren.

Mann schnappe sich die scsiutil.exe aus dem Dell Bios Update.zip und sichere zunächst einmal
das vorhandene BIOS und das vorhandene SEEPROM aus der Karte auf die Bootdiskette.

Jo und als nächstes braucht man unbedingt das SEEPROM file einer nicht OEM Karte!
Diese Files sind im Net kaum zu kriegen und sollten der Einfachheit halber aus einer
orig. Karte mittels scsiutil.exe (oder Uniflash.exe V1.4 oder seeprom.exe) auf eine
Diskette ausgelesen werden.

Mit diesem Original SEEPROM File bespielt man jetzt das SEEPROM seiner OEM Karte.
Neusstart
Jau und dann kann mann auch sofort und einfach das Original Adaptec Bios aufspielen.

Da die einzelnen Bios und SEEPROM Files ja gespeichert wurden ist eine Rückrüstung
ebenfalls einfach möglich. Habs ausprobiert klappt alles wunderbar.


Nur zur Rubrick Leergeld:

Es führt definitiv zu einer nicht mehr Funktionierenden Karte wenn man zunächst das
BIOS löscht und danach den Inhalt des SEEPROM löscht um dann auf irgendwelche
Hardwaredefaults zu warten mittlels welcher die Karte vieleicht neutralisiert werden könnte.
Nee die sitzen sowohl im Bios als auch im SEEPROM. Is beides wech is Schicht im Schacht.

Dann hilft einem jedoch:

"Hecki" Eckart Prause
Rathausstraße 17
D-25361 Krempe
bioskomp@gmx.de
Die BIOS-Seite im Internet:
http://www.bios-info.de
http://www.bios-kompendium.de http://www.bios-info.de/burning/bwelcome.htm

Der Mann is ein absoluter Hit am Lötkolben.
Er lötet das Bios raus bespielts grad mit ner Firmware, setzt nen Sockel aufs Board
da kommt dann der Chip wieder rein. Karte wird beim Start gefunden.
Jo noch kurz den SEEPROM flashen und gut is.


Abschliessend: So sollte es auch mit anderen OEM Karten funktionieren sofern die
Hardware 1:1 identisch ist. (unterschätzt mir den SEEPROM nicht) hihihi

Bis denn dann...
Mitglied: HonkeyDude
HonkeyDude 20.08.2006 um 16:39:48 Uhr
Goto Top
I am writing in english, because my german i terrible - and I hope that is OK. I can read german, but my writing is horrible.. face-smile

I have the exact same problem with my Dell OEM card, and desperately need the SEEPROM file from a standard Adaptec card.

Does anyone have such a file and can send it to me, or direct me to an address I can download it from??

Thanks!
Mitglied: casinowilhelm1
casinowilhelm1 01.10.2007 um 20:58:17 Uhr
Goto Top
Hi - I also desperately need these files - could anyone send them to me too? thanks!
Mitglied: Kpt.Chaos
Kpt.Chaos 01.10.2007 um 21:22:05 Uhr
Goto Top
Well how about an Email Contact?
Mitglied: casinowilhelm1
casinowilhelm1 01.10.2007 um 21:25:57 Uhr
Goto Top
Whoops! Sorry. It's mike@burst-tv.net
Mitglied: Kpt.Chaos
Kpt.Chaos 01.10.2007 um 21:40:07 Uhr
Goto Top
Hm.. u should have Mail.... face-wink
Mitglied: kjetilho
kjetilho 16.10.2007 um 16:39:44 Uhr
Goto Top
Can I please have a copy, too? kjetilho@kaksi.ifi.uio.no ?
Mitglied: mvdhoeven
mvdhoeven 21.10.2007 um 10:42:48 Uhr
Goto Top
Hallo,

Ich möchte auch gern diese original SEEPROM haben.
Können Sie es bitte schicken an: adm-de@mvdhoeven.com ?

Herzlichen dank!
Mathieu
Mitglied: caustic1q
caustic1q 21.11.2007 um 09:27:40 Uhr
Goto Top
hallo auch ich bin an dem seeprom interessiert vielen Dank schon mal im voraus.
newsk@gmx.de
Mitglied: Kpt.Chaos
Kpt.Chaos 23.11.2007 um 02:20:59 Uhr
Goto Top
Hi @ all,
moin zusammen,

i heard that most of the Questioners got Mail...
die meisten anfragenden haben scheinbar Post bekommen...

Please send further File request via PM or Mail to those Members... thx a lot...
Seit so gut und fragt künftig diejenigen die dies File bereits haben via PM oder Mail...

See U..
Bis danner..
Mitglied: fishxsauce
fishxsauce 10.01.2008 um 18:57:25 Uhr
Goto Top
Hi can I please have the files too. I had this card for years and now I can finally get another 15k drive in my system?!?!? Please send me the files or I'll kill myself...lol...thx!!!
Mitglied: caustic1q
caustic1q 11.01.2008 um 01:26:57 Uhr
Goto Top
No problem, send an email to me. I'll send the necessary files to you...
Mitglied: Riwithiy
Riwithiy 23.04.2008 um 20:38:34 Uhr
Goto Top
hallo auch ich bin an dem seeprom interessiert vielen Dank im voraus.
Mitglied: Riwithiy
Riwithiy 25.04.2008 um 17:17:53 Uhr
Goto Top
Hi can I please have the files too, im runnen VMware ESX 3.5 and i have to disable the hostraid function before VMware can access the disk.


Thx Jan van Bruggen
Mitglied: Pompeypete
Pompeypete 09.05.2008 um 11:25:26 Uhr
Goto Top
Hi, I really need this too. I have a PowerEdge SC1425 with the 39320 card and I need to disable HostRAID to make my Infortrend RAID unit work.

I'd be very grateful if you could send this file to pompeypete@gmail.com

Thank you.
Mitglied: Riwithiy
Riwithiy 09.05.2008 um 14:48:53 Uhr
Goto Top
Pete,

You have mail, good luck
Mitglied: caustic1q
caustic1q 09.05.2008 um 17:21:37 Uhr
Goto Top
Hello,
I'll send the necassary files, but some guys have no valid emailaddress. So I always get failjure notice. For example the google gmail.com adresses do not work if there is a file attached to an email...
And so on....
Please take a look to your emailsettings...
Please only ask for this files with valid and checked mailaccounts...all other mail addresses were immediatly blocked...by my servers..and you'll never get an answer again.
Thank you!

newsk@gmx.de
Mitglied: Pompeypete
Pompeypete 12.05.2008 um 01:47:30 Uhr
Goto Top
Thank you so much for sending me the file. I can't thank you enough! I will let you know if it works or not.

Best Regards
Peter Jackson
Mitglied: blizzardppc
blizzardppc 12.05.2008 um 12:12:41 Uhr
Goto Top
Hi chaps.

I've got the same Dell branded 39320-r with the same bios, it's been driving me nuts trying to disable the hostraid.

Any chance one of you guys could forward me the files and details.

Much appreciated, my email address is blizzardppc@btinternet.com
Mitglied: Riwithiy
Riwithiy 12.05.2008 um 13:31:26 Uhr
Goto Top
Blizzard,
You have mail, good luck
Mitglied: numeric
numeric 04.06.2008 um 05:12:57 Uhr
Goto Top
Hi, would you please send me a copy too. I would like to install Solaris 10 on a PowerEdge SC1425 with the 39320 card and I need to disable HostRAID.

I would be very grateful if you could send the file to numeric@causewaybay.hk

Thank alot,

Numeric
Mitglied: numeric
numeric 04.06.2008 um 08:48:43 Uhr
Goto Top
Hi, I got your files. Thanks for your great help.

Cheers,
Numeric
Mitglied: numeric
numeric 05.06.2008 um 11:49:40 Uhr
Goto Top
Hi, I follow the readme to flash the ROM, however it alerts that the rom is not compatible with my RAID card. My card is 39320 (without A), do you know if there is any turnaround to do that?

Thanks alot,

Numeric
Mitglied: caustic1q
caustic1q 05.06.2008 um 23:32:53 Uhr
Goto Top
Normally I need a picture to identify your controller.
But in deed there are controllers 39320-R without A or D....
With 39320-R or 39320D or 39320D-R these files do not work....
I told you to read readme.txt carefully...
The first line is:
Instructions for updating the ROM files on Adaptec 39320A SCSI Adapter

When you updated your seeprom without making a backup copy and you restarted your computer it is possible your controller is unusable now....

Last line readme.txt :
Warning....it is possible that your Adapter becomes unusable after thie procedure....
Mitglied: numeric
numeric 06.06.2008 um 06:43:55 Uhr
Goto Top
Thanks. I will check if I can provide photos or more information.

Actually it is an OEM come with Dell SC1425.

You are right, I have backup the BIOS and the SEEPROM, so I can recover it and get it working.
Mitglied: Riwithiy
Riwithiy 25.06.2008 um 19:47:56 Uhr
Goto Top
Preston,

did u got the files yet?
Mitglied: caustic1q
caustic1q 25.06.2008 um 23:58:30 Uhr
Goto Top
Please write the complete name of your controller.
There are several diffrent dell oem controllers, not all can be patched by the available files.
I'm able to send you original adaptec seeprom files and the necassary util for flashing these files.
Files available for 39320A and A-R
or I'm able to make a backupcopy for 39320D or D-R....

For all other Dell OEM cards I've no original adaptec seeprom file. So it is not possible to flash the original biosimages provided by adaptec.

If you need these files write an email to newsk@gmx.de
I'll answer as soon as possible.

Be careful and read the readme.txt.... It is possible to make your controller unusable .... when it is unusable you must solder out the seeprom and programm with an eeprom programmer and this is no fun....
Mitglied: caustic1q
caustic1q 25.06.2008 um 23:59:59 Uhr
Goto Top
Please write the complete name of your controller.
There are several diffrent dell oem controllers, not all can be patched by the available files.
I'm able to send you original adaptec seeprom files and the necassary util for flashing these files.
Files available for 39320A and A-R
or I'm able to make a backupcopy for 39320D or D-R....

For all other Dell OEM cards I've no original adaptec seeprom file. So it is not possible to flash the original biosimages provided by adaptec.

If you need these files write an email to newsk@gmx.de
I'll answer as soon as possible.

Be careful and read the readme.txt.... It is possible to make your controller unusable .... when it is unusable you must solder out the seeprom and programm with an eeprom programmer and this is no fun....
Mitglied: numeric
numeric 27.06.2008 um 03:46:30 Uhr
Goto Top
Thanks for your help. I have checked with Dell. They replied that it is Adaptec SCSI Card 39320A-R.

I would be very grateful if you could send me the files to numeric@causewaybay.hk
Mitglied: kaneman
kaneman 06.08.2008 um 22:45:33 Uhr
Goto Top
Can you please send me the files to kane8@cox.net.

Thanks

Kane
Mitglied: 70800
70800 15.10.2008 um 22:15:34 Uhr
Goto Top
Zitat von @caustic1q:
Please write the complete name of your controller.
There are several diffrent dell oem controllers, not all can be
patched by the available files.
I'm able to send you original adaptec seeprom files and the
necassary util for flashing these files.
Files available for 39320A and A-R
or I'm able to make a backupcopy for 39320D or D-R....

For all other Dell OEM cards I've no original adaptec seeprom
file. So it is not possible to flash the original biosimages provided
by adaptec.

If you need these files write an email to newsk@gmx.de
I'll answer as soon as possible.

Be careful and read the readme.txt.... It is possible to make your
controller unusable .... when it is unusable you must solder out the
seeprom and programm with an eeprom programmer and this is no fun....

Hello,
I want to use the Dell SCSI Raid controller with Vista 64 bit. I own the Dell 39320/dell controller it's a PCI-X. The controller works fine with the std Adaptec driver under Windows XP. If I install the Adaptec driver for 64 bit Vista, the system crashes to blue screen. So i think, I have to change the Bios to the original Adaptec one. So please send the files to friedrich-w@gessnernet.de. This will be very helpful for me.
Thanks.

Logist
Mitglied: shenique66
shenique66 29.10.2008 um 18:34:49 Uhr
Goto Top
Can anyone send me (riccardo@thevalentes.net) the eeprom files (and instructions) to flash a Dell OEM 39320? I need to disable HostRAID in order to run ESX. Sorry for writing in English but my German is very poor.

Thanks
riccardo
Mitglied: redfox99
redfox99 02.01.2009 um 22:21:43 Uhr
Goto Top
Does anyone has SEEPROM for Adaptec 39320-R Dell OEM ? Please email me to redfox99@hot.ee
Thank you
Mitglied: Riwithiy
Riwithiy 02.01.2009 um 22:28:50 Uhr
Goto Top
u have mail face-wink good luck and be carefull
Mitglied: hgwrueil
hgwrueil 03.01.2009 um 17:24:26 Uhr
Goto Top
Hier kommt nochmal eine Anfrage fuer das SEEPROM fuer ADAPTEC 39620 DELL-OEM. Hoffensicht seid ihr es noch nicht leid das zu versenden! Meine e-mail: hans.wilden@orange.fr Vielen Dank fuer eure Hilfe
Mitglied: Riwithiy
Riwithiy 04.01.2009 um 02:05:04 Uhr
Goto Top
u 2 have mail face-wink good luck and be carefull
Mitglied: Riwithiy
Riwithiy 04.01.2009 um 02:09:13 Uhr
Goto Top
Riccardo, u still need it. Or someone sent it to u.
If u like i can sent it to u
Mitglied: hgwrueil
hgwrueil 04.01.2009 um 14:21:00 Uhr
Goto Top
OK, have received e-mail with files and instruction. Will use it later in the day
Thank you very much and happy New Year.
Hans-Georg
Mitglied: shenique66
shenique66 04.01.2009 um 17:53:54 Uhr
Goto Top
Riwithiy -

no I haven't got the files, could you please email them to me?

Many thanks
Mitglied: Riwithiy
Riwithiy 04.01.2009 um 18:35:23 Uhr
Goto Top
Then u2 have mail, good luck and be carefull.
Mitglied: redfox99
redfox99 05.01.2009 um 12:27:11 Uhr
Goto Top
Thank you for the files face-smile Only these files are for 39320A-R card, my card is 39320-R (device ID 8095). This also works with 39320A-R BIOS, but do you have 39320-R SEEPROM ? Thank you
Mitglied: fishcake
fishcake 27.01.2009 um 23:37:26 Uhr
Goto Top
Can someone also send me the SEEPROM and instructions for an Adaptec 39320-R Dell OEM ?

My email address is: milesajm-firmware@yahoo.co.uk

Many thanks and really sorry for using English,

Andy
Mitglied: lloydie
lloydie 07.02.2009 um 23:10:17 Uhr
Goto Top
Shenique,

Could I also get the file/s (I believe Riwithiy sent you last so I'm joining the loop) as I also have DELL 39320 which I’d like to behave like a normal 39320R.
Thanks

lloydie_p at yahoo dot co dot uk
Mitglied: Riwithiy
Riwithiy 07.02.2009 um 23:47:30 Uhr
Goto Top
Then u2 have mail, good luck and be carefull.
Mitglied: RaupeNimmersatt
RaupeNimmersatt 07.02.2009 um 23:53:02 Uhr
Goto Top
Hallo,
ich habe da das gleiche Problem. Bei mir lässt sich WinXP dadurch nicht intalieren!
Ich hätte auch gern auch die Datei (SEEPROM) und hoffe dass es dann funktioniert

Ich hoffe es nerven dich die Anftragen nicht schon
und ich bekomm es trotzdem:
Mail an :
M.Herweg@nefkom.net

Vielen lieben Dank
Manfred
Mitglied: fishcake
fishcake 08.02.2009 um 00:07:36 Uhr
Goto Top
Hi,

I haven't received any files or instructions yet. Please could you you send them to me too?

Here is my address again:

milesajm-firmware@yahoo.co.uk

Many thanks,

Andy
Mitglied: Riwithiy
Riwithiy 08.02.2009 um 16:24:21 Uhr
Goto Top
Andy,
U have mail, good luck.
Mitglied: RaupeNimmersatt
RaupeNimmersatt 08.02.2009 um 19:44:49 Uhr
Goto Top
Hallo,

would you like also send me the file/s "seeprom" and the Flash Utility, as I also have the problem with 39320A -DELL

Thanks very much
Manfred

My e-Mail:
M.Herweg@nefkom.net
Mitglied: fishcake
fishcake 09.02.2009 um 01:47:53 Uhr
Goto Top
Thank you very much.

After the update the BIOS saw all the drives but would not boot into XP, so as it didn't work I have been able to confirm I have the "R" version. I have reverted back to Dell firmware with no problem. I just have to hope I can find some kind person with a 39320R.

Thanks again for your time to send the files,

Andy.
Mitglied: RaupeNimmersatt
RaupeNimmersatt 09.02.2009 um 09:47:07 Uhr
Goto Top
Hi Andy,
thanks very much for the files.
It work great.
Geetings form Germany.
Manfred
Mitglied: RaupeNimmersatt
RaupeNimmersatt 09.02.2009 um 09:51:27 Uhr
Goto Top
Hi Jan,


Bedankt voor het bestand. Heeft de controller flitste gisteren werkte wonderwel.

Nu kan ik eindelijk de nieuwe computer in gebruik.
Nogmaals, hartelijk dank voor het snelle antwoord en het bestand.


Liebe Grüße aus Nürnberg
Manfred
Mitglied: Riwithiy
Riwithiy 09.02.2009 um 09:58:49 Uhr
Goto Top
Graag gedaan, zal nu een prima kaartje zijn. In iedergeval is het nu weer een adaptec-je

Greoetn Jan
Mitglied: 75508
75508 18.02.2009 um 17:29:57 Uhr
Goto Top
Hi, I have a PowerEdge SC1425 with the 39320 card and I need to disable HostRAID.

I'd be very grateful if you could send this file to http://vasily.name/email.png

Thank you,
Vasily
Mitglied: tiswat
tiswat 05.03.2009 um 18:15:10 Uhr
Goto Top
Mitglied: tiswat
tiswat 05.03.2009 um 20:33:31 Uhr
Goto Top
Jan / Manfred,

Ik heb ook zo'n mooie kaart op de kop getikt en kan hem niet gebruiken om hetzelfde euvel...

Zou jij mij kunnen helpen aan de bestanden die nodig zijn om de originele adaptec bios erin te krijgen ?

Alvast bedankt,

Gr.

Etienne


Mail : ebrachel@q-connect.nl
Mitglied: Riwithiy
Riwithiy 06.03.2009 um 21:10:10 Uhr
Goto Top
Beste Etienne,

Alles is onderweg, suc6
Mitglied: tiswat
tiswat 10.03.2009 um 13:24:50 Uhr
Goto Top
Jan / Manfred,

Bedankt. voor de rescue, het is allemaal gelukt.

Duizend maal dank !

Gr.

Etienne
Mitglied: 77724
77724 17.04.2009 um 18:53:10 Uhr
Goto Top
can you help me out with the seeprom as well? i'm trying to use my adaptec card with esx and it's not detected because it has the dell dev_id (8095) face-sad

my email is evert_unconnected@hotmail.com

thanx!
Mitglied: Riwithiy
Riwithiy 17.04.2009 um 19:21:33 Uhr
Goto Top
Evert,

Alles is onderweg, suc6

Gr Jan
Mitglied: 77724
77724 17.04.2009 um 19:24:56 Uhr
Goto Top
how fast are you! i'm going to give it a shot. thanx! :D
Mitglied: Spamn8r
Spamn8r 27.04.2009 um 02:21:51 Uhr
Goto Top
Entschuldigen Sie bitte. Ich spreche nicht Deutsch, aber Englisch. face-sad

Would someone please send me the files to fix this as well? My e-mail is my user name (spamn8r) at yahoo dot com.

Vielen Dank!
Mitglied: Riwithiy
Riwithiy 04.05.2009 um 23:56:20 Uhr
Goto Top
Spamnr8,

it''s olmost in ur email, good luck and do not forget to make a good backup.
Mitglied: Spamn8r
Spamn8r 06.05.2009 um 15:24:10 Uhr
Goto Top
Thanks to all those who sent me the files. It worked!!! I was afraid we had wasted $80 on that stupid card. Why does Dell have to cripple it?

Many thanks to all!

James
Mitglied: Mattotaupa
Mattotaupa 12.05.2009 um 13:25:32 Uhr
Goto Top
Hallo,

ich benötige auch unbedingt das SEEPROM File für einen Adaptec 39320A von Dell.
Meine Mailadresse ist mattotaupa@web.de
Vielen Dank für die Mühe!
André
Mitglied: boolean
boolean 27.05.2009 um 14:44:19 Uhr
Goto Top
I also have the infamous 39320A-R with Dell Bios V4.30.4s5 and would highly appreciate it if someone would send me the files needed to corssflash the BIOS. (stevenvpelt@gmail.com)

Thanks in advance, Steven

EDIT: Got it from Riwithiy, thanks a billion!!
Mitglied: MT2009
MT2009 07.06.2009 um 16:23:14 Uhr
Goto Top
I want to read-out the seeprom from several adaptec cards but with all cards I just get an empty file (with just 0x00)

I tried these cards:

o Adaptec ASC-39320A (Adaptec Retail)
o Adaptec ASC-39320A (Dell OEM) - With hostraid
o Adaptec ASC-39320A (Dell OEM) - Without hostraid
o Adaptec ASC-39320A (Dell OEM) - With hostraid, 1 internal & 1 external connector
o Adaptec ASC-29320LP (HP OEM)

I used the seeprom.exe v1.0 Alpha7

When I try to read the seeprom then I get a few time-out messages whereafter it reads the 2Kbyte seeprom with only 0x00 chars

I tried it on a older P3 & a brand new HP 8600 workstation with the same result

any idea how to retrieve the seeproms?
Mitglied: nocain1
nocain1 25.06.2009 um 01:00:29 Uhr
Goto Top
Hello , I am also having this problem. Could someone please email me the SEEPROM for the 39320-R <nocain@gmail.com>

Thanks in advance,

-Nick
Mitglied: nocain1
nocain1 25.06.2009 um 01:20:57 Uhr
Goto Top
Could I please get the files for the 39320R as well <nocain@gmail.com>

Thanksx
Mitglied: jonmansfield2001
jonmansfield2001 02.09.2009 um 12:39:25 Uhr
Goto Top
Hi,

Sorry for the english.

I also have the one of the 39320A-R with Dell Bios V4.30.4s5 is it possible for one of you guys to send me the files to flash the bios back to the original Adaptec firmware, my email address is jon_mansfield_2001@hotmail.com

Many thanks in advance

Jon
Mitglied: MrHappy
MrHappy 11.09.2009 um 10:07:08 Uhr
Goto Top
Never mind.
Exchanged my card for another one.
Mitglied: radu0000
radu0000 01.10.2009 um 02:09:19 Uhr
Goto Top
Hi,
Please send to me as well this file, I'm having problems with an Precision 380 (39320A). I bought it some time now and still has no OS on it. My email address is radu.moisan@gmail.com Looking forward to see news from you. Thanks in advance.
Mitglied: griseofulvin
griseofulvin 10.10.2009 um 18:27:56 Uhr
Goto Top
Hi,

das gleiche Problem, die gleiche Bitte !
same problem, same demand:

piroer@gmx.de

vielen Dank, many Thx,

G.
Mitglied: mahell
mahell 30.10.2009 um 13:42:32 Uhr
Goto Top
Tja, also ich bin auch jemand mit demselbem Problem - ich habe einen 39320A (evtl auch -AR aber laut bild sollte es die A variante sein) mit dem Dell Raid bios. Ich benötige den Controller für zwei Bandlaufwerke aber mit dem aktuellen BIOS wird er nicht erkannt. Ich habe natürlich auch schon selbst denVersuch gemacht ein BIOS von der Adaptec-Supportpage zu flashen aber das ging natürlich nicht. Kann mir bitte jemand ein BIOS inkl flashutil an meine email (martin AT cyber-trader.de) schicken.

Vielen Dank

Martin
Mitglied: Riwithiy
Riwithiy 30.10.2009 um 20:47:05 Uhr
Goto Top
Martin,

It is almost in your mail, good luck.
Mitglied: Riwithiy
Riwithiy 30.10.2009 um 20:53:05 Uhr
Goto Top
u have mail, hope u still can use this
Mitglied: mahell
mahell 31.10.2009 um 16:24:18 Uhr
Goto Top
Thanks for the fast help Riwithiy,

the crossflash worked and my ESXi v4 now recognize the controller as a standard Adaptec 39320 controller.

Great job.

Martin

P.S. I wrote a reply but it disappeared. Hope u dont get a double reply
Mitglied: jeanfor
jeanfor 05.11.2009 um 19:32:44 Uhr
Goto Top
Could you please send me the files needed for DELL OEM C4272 ADAPTEC 39320 39320-R ONE CHANNEL 64BIT PCI-X U320 SCSI

I have version 4.30.4S5 and would like to be able to disable the HostRaid.

Please send the files to forichon@gmail.com

Thanks
Mitglied: jeanfor
jeanfor 06.11.2009 um 17:27:33 Uhr
Goto Top
I also have the one of the 39320A-R with Dell Bios V4.30.4s5 is it possible for one of you guys to send me the files to flash the bios back to the original Adaptec firmware, my email address is forichon@gmail.com

Many thanks in advance

Jean
Mitglied: busch09
busch09 06.11.2009 um 19:42:01 Uhr
Goto Top
Hi,

falls du noch online bist und zeit hast. könntest du mir die files bitte auch mailen... cb@cbxx.org
Mitglied: Riwithiy
Riwithiy 06.11.2009 um 23:59:31 Uhr
Goto Top
Jean,

U have mail, good luck and don't forget to make a backup.
Mitglied: Riwithiy
Riwithiy 07.11.2009 um 00:09:04 Uhr
Goto Top
CB, it comming your way be carefull and make a backup
Mitglied: mausoma
mausoma 15.11.2009 um 12:13:10 Uhr
Goto Top
Hallo,

ich hätte auch Bedarf.
Falls jemand die Datei hat, bitte schicken an

bertl2004 ät mausoma.de

Merci
Mitglied: mausoma
mausoma 15.11.2009 um 12:35:52 Uhr
Goto Top
Ok, sorry, again in english

I would also need the file(s).

So if anyone has got them, I would be pleased if he/she could send them to me:

bertl2004 ät mausoma.de

Thanks in advance
mausoma
Mitglied: Riwithiy
Riwithiy 15.11.2009 um 13:04:14 Uhr
Goto Top
U have 2 mails in the internet freeway face-wink

good luck.
Mitglied: vectorite
vectorite 25.11.2009 um 01:59:17 Uhr
Goto Top
Hi, Sorry for also writing in english, I would really apreciate the files too

Regards
Andy

andy at moorefun dot net

Many thanks in advance
Mitglied: mausoma
mausoma 25.11.2009 um 07:59:51 Uhr
Goto Top
I sent you the files.
So now you're responsible for the next to get him the files also ...

mausoma
Mitglied: vectorite
vectorite 26.11.2009 um 17:15:55 Uhr
Goto Top
Worked perfectly, thanks again
Mitglied: vassilis
vassilis 28.11.2009 um 11:44:53 Uhr
Goto Top
Hi, i do not know German ,so sorry for the English.

I have the dell oc4272 scsi 39320 -r (win xp device manager show as asc-39320).
It is a oem raid card and i want to disable the host raid and use it as normal adaptec scsi card in order to install windows 7.
Can anyone give me the bios and the way to make the update ?
And how can i do it because i donot have any of card's cds.

Thank you anyway
Vassilis (vassilis_gr@yahoo.com)
Mitglied: vassilis
vassilis 01.12.2009 um 13:00:46 Uhr
Goto Top
Hi,

Anybody that has the files and can send them ?

Sorry for the english.


Thank you
vassilis (vassilis_gr@yahoo.com)
Mitglied: mattbrewster
mattbrewster 02.12.2009 um 19:14:40 Uhr
Goto Top
I have just received an Adaptec ASC-39320/DELL and it won't work in ESXi without disabling HostRAID.

Can I please have the vanilla BIOS files needed for this card so that I can disable HostRAID?

My email is matt (at) mattbrewster (dot) co (dot) uk

Thanks to you in advance face-smile
Mitglied: Riwithiy
Riwithiy 03.12.2009 um 16:49:13 Uhr
Goto Top
vassilis

U have mail, good luck and don't forget to make a backup.
Mitglied: Riwithiy
Riwithiy 03.12.2009 um 16:49:42 Uhr
Goto Top
Matt,

U 2 have mail, good luck and don't forget to make a backup.
Mitglied: Indigogyre
Indigogyre 07.12.2009 um 02:41:35 Uhr
Goto Top
Good Evening,

This seems to be the only place that I have found with the proper knowledge to resolve the ASC-39320/DELL issues. I also have the same problem as most of the others in not being able to disable the HostRAID support. Would you be nice enough to email me the required files so that I can fix my card? Please send them to indigogyre on the still functioning yahoo dot com site.

Many thanks!
Dean
Mitglied: mausoma
mausoma 07.12.2009 um 09:27:47 Uhr
Goto Top
Hi all,

to get rid of all these "who sent whom" I uploaded the relevant files to a fileshare provider.

Download ...
http://www.4shared.com/file/167086373/143ee63/disk.html
http://www.4shared.com/file/167086375/e8204b56/HowTo.html
http://www.4shared.com/file/167421105/e8136bf1/image.html

... make a boot device using an disk image (image.html) via winimage or equivalent
... or use an existing boot device using the files (disk.html)

... then follow the howto.

Good luck, use at your own risk
Mitglied: Riwithiy
Riwithiy 09.12.2009 um 11:39:16 Uhr
Goto Top
Lol, simple and no one thought doing this ha ha, good job.
greets Riwi
Mitglied: mattbrewster
mattbrewster 17.12.2009 um 13:28:29 Uhr
Goto Top
Thanks to this forum I got my Adaptec card working, so I thought I would take a few images of the process and create a "how to" for other people in the future. I've also made the disk/images files available, should the links above ever go dead.

My guide (and pictures) can be found here: http://www.randomsnippets.co.uk/2009/12/disable-raid-on-adaptec-39320-w ...

Merry christmas to everyone face-smile
Mitglied: Indigogyre
Indigogyre 23.12.2009 um 14:51:28 Uhr
Goto Top
Holiday Gretings!

I wanted to thank everyone for the information and the links to the files. Thanks to this information I was able to reflash my ard and it is now working properly with the applications I needed. It was a very simple process. This is a very useful site and I wish I could read german to better utilize it. face-smile

Happy Holidays!

Dean
Mitglied: binhvt26
binhvt26 11.05.2011 um 21:11:33 Uhr
Goto Top
I also have the one of the 39320A-R with Dell Bios V4.30.4s5 is it possible for one of you guys to send me the files to flash the bios back to the original Adaptec firmware, my email address is binhvt26@yahoo.com

Many thanks in advance

Binh
Mitglied: Dimon7777
Dimon7777 27.06.2011 um 13:45:13 Uhr
Goto Top
Guten Tag!

Ich möchte auch gern diese original SEEPROM haben.
Können Sie es bitte schicken an: ibdima@web.de ?

Herzlichen dank!
Dmitri
Mitglied: Dimon7777
Dimon7777 29.06.2011 um 21:01:45 Uhr
Goto Top
Zitat von @Kpt.Chaos:
Moin zusammen...

Habe das Problem gelöst.. freu face-smile

folgende Vorgehensweise sollte für jeden mit Ähnlichem Problem funktionieren.

Mann schnappe sich die scsiutil.exe aus dem Dell Bios Update.zip und sichere zunächst einmal
das vorhandene BIOS und das vorhandene SEEPROM aus der Karte auf die Bootdiskette.

Jo und als nächstes braucht man unbedingt das SEEPROM file einer nicht OEM Karte!
Diese Files sind im Net kaum zu kriegen und sollten der Einfachheit halber aus einer
orig. Karte mittels scsiutil.exe (oder Uniflash.exe V1.4 oder seeprom.exe) auf eine
Diskette ausgelesen werden.

Mit diesem Original SEEPROM File bespielt man jetzt das SEEPROM seiner OEM Karte.
Neusstart
Jau und dann kann mann auch sofort und einfach das Original Adaptec Bios aufspielen.

Da die einzelnen Bios und SEEPROM Files ja gespeichert wurden ist eine Rückrüstung
ebenfalls einfach möglich. Habs ausprobiert klappt alles wunderbar.


Nur zur Rubrick Leergeld:

Es führt definitiv zu einer nicht mehr Funktionierenden Karte wenn man zunächst das
BIOS löscht und danach den Inhalt des SEEPROM löscht um dann auf irgendwelche
Hardwaredefaults zu warten mittlels welcher die Karte vieleicht neutralisiert werden könnte.
Nee die sitzen sowohl im Bios als auch im SEEPROM. Is beides wech is Schicht im Schacht.

Dann hilft einem jedoch:

"Hecki" Eckart Prause
Rathausstraße 17
D-25361 Krempe
bioskomp@gmx.de
Die BIOS-Seite im Internet:
http://www.bios-info.de
http://www.bios-kompendium.de http://www.bios-info.de/burning/bwelcome.htm

Der Mann is ein absoluter Hit am Lötkolben.
Er lötet das Bios raus bespielts grad mit ner Firmware, setzt nen Sockel aufs Board
da kommt dann der Chip wieder rein. Karte wird beim Start gefunden.
Jo noch kurz den SEEPROM flashen und gut is.


Abschliessend: So sollte es auch mit anderen OEM Karten funktionieren sofern die
Hardware 1:1 identisch ist. (unterschätzt mir den SEEPROM nicht) hihihi

Bis denn dann...



Guten Tag!

Ich möchte auch gern diese original SEEPROM haben.
Können Sie es bitte schicken an: ibdima@web.de ?

Herzlichen dank!
Dmitri


Hi - I also desperately need these files - could anyone send them to me too? thanks!
Mitglied: DasGoldeneLamm
DasGoldeneLamm 01.11.2011 um 17:07:47 Uhr
Goto Top
Guten Tag!

auch ich würde mich über das original SEEPROM freuen.
das.goldene.lamm@gmail.com

Herzlichen dank!

DGL

---
Hi,

i also desperately need these files.
Could anyone send them to me too?
das.goldene.lamm@gmail.com

with kind regards

DGL
Mitglied: buka-J
buka-J 01.08.2014 um 20:27:55 Uhr
Goto Top
Hello everybody,

leider ist ja die Seite mit der ANleitung randomsnippets down.

Ist SE39320 noch irgendwo verfügbar? Würde das org. seeprom auch gerne haben...
buka.jay@web.de

Büdde! Danke!
cheers
Mitglied: RaupeNimmersatt
RaupeNimmersatt 02.08.2014 um 17:43:27 Uhr
Goto Top
Servus buka jay,

also wenn du es möchtest ich habe es noch.
Ich schike es dir an dein E-MAiladresse

Gib kurz bescheid obs angekommen ist.

LG
Manfred
Mitglied: buka-J
buka-J 05.08.2014 um 19:27:19 Uhr
Goto Top
So: habe Dateien erhalten & Karte erfolgreich geflasht

Danke an Alle & Grüße
buka J
Mitglied: hansjoerg.jaeckel
hansjoerg.jaeckel 28.08.2014 um 19:54:17 Uhr
Goto Top
Hallo RaupeNimmersatt,

handelt es sich um die erforderliche SEEPROM-Datei für den Adaptec SCSI Controller 39320A-R mit dem Dell Bios V4.30.4s5?

Dann wäre auch sehr interessiert!
Mitglied: Antikapitalista
Antikapitalista 29.02.2020 um 00:23:17 Uhr
Goto Top
Your webpage may have disappeared even faster than the links above...
Mitglied: RaupeNimmersatt
RaupeNimmersatt 29.02.2020 um 01:12:06 Uhr
Goto Top
Was meinst du??
Mitglied: Antikapitalista
Antikapitalista 29.02.2020 um 21:47:26 Uhr
Goto Top
Ich meinte, dass seine Webseite ( http://www.randomsnippets.co.uk/2009/12/disable-raid-on-adaptec-39320-w ... ) und ihre Dateien möglicherweise früher als die Links zu www.4shared.com erloschen waren.
Mitglied: Antikapitalista
Antikapitalista 01.03.2020 um 22:05:02 Uhr
Goto Top
Sehr geehrter Große Geist,

haben Sie noch die SEEPROM-Datei?

Wenn ja, können Sie mir bitte die Datei an die folgende E-Mail-Adresse schicken?
antikapitalista1@yahoo.com

Vielen herzlichen Dank!

Martin
Mitglied: RaupeNimmersatt
RaupeNimmersatt 02.03.2020 um 14:33:12 Uhr
Goto Top
Hallo Martin
ist gleich unterwegs,
LG
Manfred